Welcome to the latest Xploder guide. Today we"re taking a look at the Xbox Cheatsaves System. This system allows you to backup your saves from you Xbox to your PC and to download new saves from Xploder.net and copy them over to your console.
Now before we begin with the fun stuff you"ll need to install the drivers and Xploder software. So pop the disk in the drive, follow all the instructions and install the software. Now that wasn"t too bad was it? You may find you have to reboot your PC and it"s good practice to do so, so once you"re up and running again the next thing you need to do is to attach the USB connector to your PC.

You can see me inserting the USB plug into a spare USB socket on my PC in the above image.

Now you can go ahead and insert the Xploder Cheatsaves memory unit into the connector. We"ll then be ready to start the Xploder software, find the software via the Windows Start Menu or from a desktop shortcut and we can begin.

Above you"ll see that we"ve started the Xploder Cheatsaves software. On the left hand panel you can see the saves currently stored on the PC. You can also see that the right hand panel is blank, that"s because the memory unit wasn"t plugged into the connector when the screenshot was taken. Any saves that exist on the memory card appear in the right hand panel.
Let"s search for some saves at Xploder.net and download them onto the PC using the Cheatsaves software. First you"ll need to enter your registration details so you can log into Xploder.net. If you"re not registered yet, follow the instructions in the manual and make sure you"ve got your m-code card to hand, it"s a small card with a serial number that came with your Cheatsaves product.

In the above image you can see that I"ve logged into the system, I"ve blurred my password but it has been entered, allowing me to access the online store of Xploder saves.
We want to look for saves on the Xploder online system so if you click the button to the far left of the software"s left-hand panel it will open the software"s online component.
Click the icon at the top right of this new panel and the search box will appear, you can see it in the image below.